YA201 Auto OBD2 EOBD CAN Fault Code Reader Scanner Car Diagnostic Scan Tool

Car details

YA201 OBD2 Scanner Live Data OBD2 Fault Code Reader Multi-language EOBD OBD2 Automotive Scanner Car Diagnostic Tools Free Update How to use ? Locating Data Link Connector 1.Choose a location under driver side dash under steering wheel) and use that description in both places. 2.If unsure about location of dlc, check vehicl manual or reputable service center about location Connect the tool 1.If the connector is not there a label should be there indicating the whereabouts of the connector. 2:If necessary, remove the cover from the DLC 3.Turn the ignition switch to the on position. Do not start the engine 4.Plug the OBD connector into the Data Link Connector. 5.The tool will attempt to identify the vehicle. If successful, the vehicle identifie lisplayed. if the vehicle cannot be identified, menus will be shown for you to select the vehicle manually Functions: 1.Diagnostic Functions Use this function to select a vehicle and then proceed to the diagnostic Menu. 2:Read codes Reads DTCs from vehicles computer with Koeo or KOE 3.Erase Codes Deletes dtcs from vehicle s memory 4.Live Data Live Data menu lets you view, record and playback real time PIDs data from the electronic control mod In live data menu, you can insert the selected item to front by holding pressing the "ok" key for 3 seconds 1)All Datastream: Views vehicle Parameter Identification Data(PIDs)in real time PIDs are displayed in either a text format or graph format when available 2)Graph Display Show the live data via graph mode, selecte PIDs by "OK" key, enter the graph by "Return"key switch the PIDs by "UP"and "Down"key 3)Record Record the PIDs frame, selecte PIDs by "OK" key,enter the record page by "Return" key. Select the storage slot location to start record 4)Playback Choose the record slot to playback the live data, switch frame by"UP" and "Down"key 5.Freeze Frame Displays a snapshot of operating conditions at the time of a fault. 6.Vehicle Info Scan tool displays the vehicle's VIN number, Calibration ID (s) and CVNthat identify the software version in the vehicles control module (s.)The tool also displays In-Use Performance Tracking of importantreadiness monitors. 7.Component Test Tool will display a list of components and their locations on the vehicle.This function will always appear on the Main Menu. This selection will appear on the Diagnostic Menu only when the toollhas a list of component locations for the currently selected vehicle. 8.On-Board Monitoring Scan tool controls the operati...

    Car specifications:

  • Price :     $21
  • Time Left: 11 d, 9 h, 28 min (Oct 18, 2022 02:42:15 UTC)
  • Condition: New
  • Warranty: Yes
  • Location: Houston, Texas

Buy it Now

Right Now on eBay